Sealutions Calcium chloride dihydrate 0.8 kg
€12.95
Available, delivery time: 3-4 days
Component B for dosing calcium and carbonate hardness using the Balling method
The Balling method works with the addition of sodium hydrogen carbonate and calcium chloride, resulting in soluble calcium hydrogen carbonate. To compensate for the excess sodium chloride formed in the process, sodium chloride-free sea salt is used at the same time.
Application
| 147 g | Sealutions Calcium chloride dihydrate |
| 168 g | Sealutions Sodium hydrogen carbonate |
| 50 g | Sealutions mineral salt |
dissolve completely in 2 litres of water. Maintain the carbonate hardness in the range of 9 - 11° dH by adding equal amounts of each of the three solutions daily. Experience has shown that for a 300 litre reef tank you will initially need just under 100 ml of each solution per day. Depending on the need, the daily dose must be increased or reduced slightly in the following period in order to remain within the desired target KH range.
The calcium requirement and therefore the consumption of the three solutions is based on not evaporation, but on the biologically active stocking of the aquarium.
Possible dangers
- Keep out of reach of children!
- May cause severe eye irritation
Pictograms
Signal word: Caution
Hazard statements
H319 Causes serious eye irritation
Precautionary statements
P280 Wear protective gloves/eye protection
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
Rosenstraße 22
71101 Schönaich
Germany
Login
Accessories
Enquiry form
Send us an e-mail. We look forward to hearing from you.