DRAK CO₂ solenoid valve
High-quality solenoid valve (night shut-off. 2/2-way solenoid valve, nickel-plated) for controlling the addition of CO₂ with low energy consumption and therefore only minimal heating (only gets warm to the touch even in continuous operation). Supplied with matching 1/8" × 6/4 screw fittings with union nut (nickel-plated brass).
A particular advantage of this solenoid valve is that it can be mounted directly on the pressure reducer, as a 1/8" external thread is already present after removing the hose connection, thus eliminating the need for an adapter.
Technical data (tabular)
- 1.6 m connection cable with Schuko plug
- Power supply: 230 V AC; 50/60 Hz; 3.5 VA open
- DN: 1.0 mm, NBR seal
- 100 % ED (suitable for continuous operation)
- Normally closed
- Permissible medium temperature: -10 - 90 ºC
- Max. Max. ambient temperature: 55 ºC
- Protection class IP65 (dust-tight and protected against water jets)
- Insulation class F (155 °C) with screwed plug
- Max. Pressure difference: 16 bar
The connection cable can also be easily rotated through 180°. To do this, simply loosen the fastening screw, pull off the power connection and plug it back in at a 180° angle. Don't forget to screw it tight again!
Lanterstraße 37e
46539 Dinslaken
Germany
Login
3 reviews
25 February 2014 13:27
Works without any problems!...
Works without problems!
11 February 2014 09:58
Works perfectly!...
Works perfectly!
10 May 2013 18:19
Fair price,good quality,important was the...
Fair price, good quality, important to me was the very low power consumption, absolutely recommendable.
Similar Products
Enquiry form
Send us an e-mail. We look forward to hearing from you.